ForBaignoire ForDouche ForClawfoot ForÉvier ForTrousse de réparation

Kit de finition de base de douche ArmoGlaze facile à verser, fabriqué aux États-Unis.

Best seller on Amazon

Le resurfaçage de receveur de douche DIY en toute simplicité. Nous fournissons les instructions et les outils pour que vous puissiez renouveler votre ancienne douche en toute tranquillité. Pas besoin d'embaucher des rénovateurs de bain à prix élevés. Ce kit est idéal pour les receveurs de douche 2x2, 3x3 et 6x3. Émail inodore de haute qualité (testé sans COV). Cet émail époxy spécialement formulé a été développé par des réémailleurs professionnels qui souhaitaient concevoir un produit robuste. Beaucoup plus épais que les ajustements de bricolage habituels et facilite l'application pour tout le monde. Pas de vapeurs ou d'odeurs toxiques. Fabriqué aux États-Unis. Nous proposons des - Formation vidéo en plusieurs étapes pour que vous puissiez réémailler vos receveurs de douche en toute confiance.

Prix:

100.00

Taille

Small Shower Trays (2 x 2 and 3 x 3) $100. 00 Large Shower Trays (6 x 3) $125. 00

120 minutes

Des instructions

Détails

ArmoGlaze DIY Kit

Odorless Process & Product

No ventilation needed. No VOC, toxins, and fumes.

Doesn't Peel Off

Doesn’t peel under bath mat with suction cups or with leaky faucet.

20 Years Life Expectancy

Pour-On Application

No lines, drips, or orange peel marks. Smooth, mirror-like surface.

Video Instructions

Mirror-like finish

Gleaming white color

32 x times thicker

We are the manufacturer; made in the USA

Advanced odorless formula

About ArmoGlaze Products

ArmoGlaze products is a high viscosity, two components epoxy-based enamel designed for refinishing of bathtubs, sinks, shower floors, etc. Also, it can be used for countertops refinishing.

ArmoGlaze products applies as a very smooth and glossy layer, with no streaks or rough spots.
The application method is simple; anyone can do it.
Doesn’t yellow over time.
No experience or professional equipment needed; reasonably priced refinishing business startup.

TRAINING CLASSES

to become a professional refinisher. Affordable start up opportunity with sky-limited market.

PROFESSIONAL REGLAZING PRODUCTS

Pour-on application, odorless, never peeling product. 20 x times thicker than spraying or other refinishing liners.

PROFESSIONAL PRODUCT

for best results and safer application. Zero VOC or fumes.

TECHNICAL SUPPORT

If you have any questions, feel free to contact us.

Post-Reglaze Care Information

After refinishing leave tub for 36 hours at room temperature before using it again.
Do not use any products with coloring effects for 2 weeks after the refinishing. Though the tub is ready for use after 36 hours of being refinished, the surface may need more time to harden fully.
Treat your refinished bathtub as you treat new bathtub. Never use abrasive cleaners or abrasive pads. You can use baking soda, but not often as it may reduce bathtub gloss. Regular cleaning is important to prevent soap scum build-up that will be hard to remove once it hardens.
Once a week clean the whole tub - you should remove any debris from it and use mild soap and water with a soft washcloth. DO NOT USE Comet or Ajax, steel wool, scratch pads, wire brushes, harsh abrasives, any cleaning products with BLEACH, ammonia.

Download Care Instructions